Posted on

Thoughts I had Making a Kimono

 Hello!

You may have noticed (because we keep talking about it) that we’re really trying to up our making game in 2017 and my last blog post was all about making up Mattie’s Rob Ryan Clothkits skirt, which we thoroughly enjoyed.

This week I decided to pop open one of the Kimono Clothkits paper patterns that we sell and give that one a go, since it’s been my favourite since they arrived on our doorstep. What follows is part review, part nonsense – enjoy!

One of the main reasons Mattie and I get so reluctant to make anything is that we don’t like using up the beautiful stock that could be sold to someone etc etc, but since we’re trying to go against this instinct I boldly decided to use our most delicious fabric to make this kimono. In for a penny, in for a pound and that.

We call this our William Morris fabric, for obvious reasons, and it does sell at a rather exciting £20 a metre. But, and I know I would say this, it is 100% worth it – it’s the most beautiful colour in real life (we have a yellow version too!) and it’s amazingly light and soft and it just makes me all gooey, ok?

First things first, I traced the pattern out in a size small, basically because I was thrilled to make something in a size small and not have to even worry about it fitting (because it’s a kimono and clearly very loose in all sizes).

This is issue no.1 – I am not a perfectionist and so even while tracing things I get distracted and end up with real wiggly lines that I try to even out during cutting but never really managed to overcome. Important note: this made absolutely no difference to the finished kimono so there.

There’s 3 main pieces, plus 3 facing pieces. It said that the pattern wasn’t suitable for any fabric smaller than 115cm, but this one is 110cm and was fine…I assume because I made it in the smaller size.

Sewing this was pretty straightforward until the facings got involved. You do have to finish a lot of raw edges, and since we’re all still scared of the overlocker (it has blades! run away) I did a standard zig zag stitch…to be honest this was the downside of this make – I got super bored of doing zig zag stitch. It’s necessary but my god it’s dull.

Here’s the facing fun. This forced me to do a lot of standing still, staring at it, sticking my tongue out all deep in thought. I think if I’d cut my pattern/fabric out really neatly this wouldn’t have been so confusing for me but you live and you learn. Basically there were two ways these could have been sewn together and neither way looked like the picture in the instructions so I gambled and just went with one. Luckily it seemed to work out ok so I didn’t really even learn a lesson here.

Sewing the facing to the main piece was v tricky and I did purposeful slow sewing. Once that was done and all ironed to within an inch of its life, you have to top stitch basically all edges of the kimono, which again made me all nervous and sensible for a while.

And here’s the finished piece!

Conclusion: I loved making this, mainly because my eyes got to gaze upon this fabric for a whole day. It was pretty straightforward, but the same as with the skirt pattern I did feel that a certain amount of prior knowledge is assumed even though they’re aimed at beginner’s. It’s nothing you couldn’t figure out with a friend/the internet though.

Thank you for reading this! Hang out with us on facebook, twitter and instagram for first peek at our next make.


 

Posted on 1 Comment

Clothkits Pattern Review

 If you haven’t heard of Clothkits before (I had no idea of anything more than the name until about a year ago) here’s a bit of history – they’re a British company that’s been printing awesome sewing kits since 1968 that were hugely popular in the 1980’s. Their speciality is patterns that are printed directly on to fabric, so you don’t have to arse around with too much cutting out. After spotting them at a trade show last year we’ve been selling their paper patterns in the shop – the first patterns we’ve ever liked enough to stock! We’re fussy like that.

A few years ago Mattie acquired one of their fabric patterns, a Rob Ryan printed skirt. It has ever since been living around the back of Bunyip and it’s only now 3 years on that we’ve managed to commit the time to making it!

The first thing we did was trace over the pattern so that we could keep it for next time! Smart. I’m hoping to make a shorter one in our amazing peacock fabric, but considering this took 3 years to start I’m not getting my hopes up until around 2020.

Plus points: obviously I really enjoyed not having to mess about with patterns too much. You just join up the cutting lines to the size you want and voila – cut it out. The fabric the design is printed on was beautifully thick and printed in the UK which obviously fills our hearts with joy. There were also only a few pattern pieces, meaning the whole process didn’t feel too overwhelming and there was less chance of losing any of it.

The whole skirt from cutting to finishing only took us about 2 afternoon sessions in the shop which is pretty good going!

My only criticism of the kit was that some of the instructions were slightly confusing and I had moments of standing looking at the pattern for too long trying to piece together what they were trying to tell me. Considering that the pattern is meant for total beginner’s some of the processes are really brushed over and I think I would have struggled slightly if it had been the first garment I’d ever made. Also the photos they used to demonstrate said instructions were really hard to see! I know it’s hard to take photos of sewing lines but even so…

That being said, we actually stock almost the same pattern in our paper range, so we cracked it open to see if they’d updated it at all and – they have! Instead of photos there’s lovely illustrations, and they’ve changed almost all of the instructions that I had any complaints about. So even though you’ll have to cut the pattern out yourself you may find the process even more enjoyable!