You will need:
x2 Different fabrics 14cm x 62cm
x1 Button between 15 – 20mm
Tools and Equipment:
Pen / Tailors Chalk,
Iron and Ironing board,
a mug / something with a curve to draw round
You’re find this project very similar to last months Pencil Roll so I’ve you’ve made that one then this should be a breeze, Let’s get Making!
1. Decide which fabric will be your inner and which your outer. For this cutlery pouch the yellow raindrops is the inner and light denim with beetles and bugs the outer – perfect for a picnic right? Cut out of both fabrics one piece 14cm x 37cm, and one piece 14cm x 25cm. To the longer piece curve the edges like in the photo.
2. To make the pouch take the two smaller pieces of fabric, right sides together and stitch along the top – shorter edge of the fabric (1cm seam allowance for this project) Open out and press and then fold so that wrong sides are facing and press the seam down.
3. Next you need to make a little sandwich. Take your inner large piece of fabric right side up. Lay on top the newly sewn pouch with your outer fabric UP. Then finally the outer larger piece face down on top. Pin.
4. Stitch around the edge leaving a 5cm turning gap along one of the straight edges, then trim the corners and curved edges with pinking shears
5. Turn outside out – use a really large knitting needle to help with the corners and press with an iron.
6. Ladder stitch the gap
7. Fold the top flap down and there’s only one step left, make a button hole! You can use the feature on the sewing machine or hand stitch whichever is easiest! I placed the button so when in use it was about 2cm up from the edge of the pouch as shown in the photos. It’s nice to have the flap completely down so that your cutlery can’t poke out when you’re on the go.
And there you have it! Please let us know how you got on with this project and if you share on social media tag us in with #bunyippotm so we can see them!